移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

Performance evaluation of functionalized ordered mesoporous silica for VOCs adsorption by molecular dynamics simulation

Volatile organic compounds (VOCs) are growing pollutants now that cause the serious environmental pollution and threaten human health. The functionalized ordered mesoporous silica (FOMS) has attracted considerable attention in adsorbing VOCs. In this paper, the molecular dynamics simulation was used to simulate the adsorption performance of FOMS on VOCs (acetone, ethyl acetate and toluene). After simulating different pore sizes (2 nm, 3 nm and 4 nm) adsorption performances of ordered mesoporous silica (OMS) on VOCs, OMS with a pore size of 4 nm was selected to further study the influence of functional groups (vinyl, methyl, and phenyl). The following law was obtained: the saturated adsorption capacities of vinyl-functionalized OMS (V-FOMS) to acetone, ethyl acetate and toluene were 3.045 mmol.g^?1, 2.568 mmol.g^?1 and 1.976 mmol.g^?1 respectively; the saturated adsorption capacities of methyl-functionalized OMS (M-FOMS) to acetone, ethyl acetate and toluene were 2.798 mmol.g^?1, 2.312 mmol.g^?1 and 1.698 mmol.g^?1 respectively; the saturated adsorption capacities of phenyl-functionalized OMS (P-FOMS) to acetone, ethyl acetate and toluene were 2.124 mmol.g^?1, 1.941 mmol.g^?1 and 1.539 mmol.g^?1 respectively. These results show that the adsorption ability of FOMS for different adsorbates follows the sequence of acetone > ethyl acetate > toluene. Furthermore, the interaction between functional groups (vinyl, methyl and phenyl) in FOMS and VOCs was explored. It is found that the interaction between different functional groups and adsorbates is different (interaction energy effect). This interaction energy effect promotes FOMS to better adsorb VOCs. This work would provide fundamental understanding and guidance for the development of novel adsorption materials for the adsorption of VOCs.     

Mechanical property and deformation mechanism of gold nanowire with non-uniform distribution of twinned boundaries:A molecular dynamics simulation study

The mechanical property and deformation mechanism of twinned gold nanowire with non-uniform distribution of twinned boundaries(TBs) are studied by the molecular dynamics(MD) method. It is found that the twin boundary spacing(TBS) has a great effect on the strength and plasticity of the nanowires with uniform distribution of TBs. And the strength enhances with the decrease of TBS, while its plasticity declines. For the nanowires with non-uniform distribution of TBs, the differences in distribution among different TBSs have little effect on the Young's modulus or strength, and the compromise in strength appears. But the differences have a remarkable effect on the plasticity of twinned gold nanowire. The twinned gold nanowire with higher local symmetry ratio has better plasticity. The initial dislocations always form in the largest TBS and the fracture always appears at or near the twin boundaries adjacent to the smallest TBS. Some simulation results are consistent with the experimental results.     

改进型单晶炉提拉系统偏心平衡研究

随着光伏行业的快速发展, 对硅单晶的品质和长晶装备的稳定性的要求也不断提高。直拉法是生产硅单晶的主要方法,通过提高单晶炉副室的高度以扩大单晶硅的生产规模。由于副室高度的大幅增加,且单晶炉提拉头质心相对于旋转轴心有一定距离,对单晶炉整体稳定性有较大影响,从而降低了单晶硅的生产质量。针对此问题,对单晶炉建立可靠的力学分析模型,采用数值仿真方法,对单晶炉整体进行动力学响应分析,计算得到副室高度增加后的单晶炉工作时中钨丝绳下端晶棒的运动规律以及最大摆动幅度,为改进设计提供依据。数值仿真分析表明提高单晶炉副室高度后,提拉头较大的质心偏心是单晶炉提拉系统发生摆动的主要原因。在此基础上提出在提拉头上添加质心调节装置,通过控制系统调节可保证提拉头质心位置在旋转轴线上以降低提拉系统的摆动。     

9-(4-溴丁基)-9H-咔唑的相转移催化合成、表征及室温磷光性能研究——推荐一个大学化学综合实验

推荐了一个大学化学综合实验"9-(4-溴丁基)-9H-咔唑的相转移催化合成、表征及室温磷光性能研究"。实验利用相转移催化合成9-(4-溴丁基)-9H-咔唑分子,采用核磁共振、高分辨质谱和红外光谱对其分子结构进行表征,并利用紫外-可见吸收光谱、稳态/瞬态荧光光谱和密度泛函(DFT)理论计算对其室温磷光性能进行研究。本综合实验涵盖了有机化学、分析化学、物理化学、仪器分析以及理论化学的知识点,建议纳入化学专业高年级综合实验课程。     

Pd–H and Ni–H phase diagrams using cluster variation method and Monte Carlo simulation

This work focuses on interstitial solid solutions of hydrogen in the face-centred cubic (fcc) host lattice of palladium and nickel, using a first-principles based approach. Cluster Variation Method (CVM) and Monte Carlo simulation algorithms were especially designed, allowing a coupled use of both techniques, to study hydrogen–vacancy interactions inside an fcc metallic host lattice. First-principles calculations provided the H–Vac interaction energies by structure inversion method. The phase diagrams and thermodynamic properties were computed using only theoretical inputs. The mechanisms leading to the formation of the miscibility gaps observed for both Pd–H and Ni–H systems and the hydrogen ordering on palladium interstitial lattice were reproduced without any empirical term.     

以学生为中心的递进式“精细化工”实验教学

针对学生实验课积极性不高、实验教学效果不理想的问题，对一门选修课"精细化工"的实验进行了重新思考和设计，让学生参与从实验具体内容制定、操作到结果讨论的整个过程，并首次以"递进式"实验的方式由学生参与第2次实验（基于前一个实验的改进和完善），使学生了解理论知识转化为可行实验方案的具体做法，切身体会在实验原理相同的情况下，实验方案的细微调整对实验结果的巨大影响。结果表明，这种"以学生为中心"的改进能让学生注重实验细节，同时关注实验失败的原因，并在第2次实验中及时修正。这为学生实验综合素质的培养提供了一种教学思路。     

新型表面活性剂的合成与表征综合实验设计

将专业综合实验与科研成果相结合,设计了新型表面活性剂的合成与表征综合化学实验。实验涉及含羟基基团的表面活性剂的合成、纯化、结构表征和性能测定等操作。该综合实验将有机化学基础知识、表面活性剂的基本性质与前沿科学研究相结合,从而实现学生实验技能的提升、认知视野的拓展和综合能力培养的目标。     

An improved depth-averaged nonhydrostatic shallow water model with quadratic pressure approximation

Phase-resolved information is necessary for many coastal wave problems, for example, for the wave conditions in the vicinity of harbor structures. Two-dimensional (2D) depth-averaging shallow water models are commonly used to obtain a phase-resolved solution near the coast. These models are in general more computationally effective compared with computational fluid dynamics software and will be even more capable if equipped with a parallelized code. In the current article, a 2D wave model solving the depth-averaged continuity equation and the Euler equations is implemented in the open-source hydrodynamic code REEF3D. The model is based on a nonhydrostatic extension and a quadratic vertical pressure profile assumption, which provides a better approximation of the frequency dispersion. It is the first model of its kind to employ high-order discretization schemes and to be fully parallelized following the domain decomposition strategy. Wave generation and absorption are achieved with a relaxation method. The simulations of nonlinear long wave propagations and transformations over nonconstant bathymetries are presented. The results are compared with benchmark wave propagation cases. A large-scale wave propagation simulation over realistic irregular topography is shown to demonstrate the model's capability of solving operational large-scale problems.